보유장비

Ion Milling System | 이온 빔 절삭기

Ion Milling System
보유장비 관련 정보
연구실/분야
모델명 IM4000
제조사 Hitachi High-Technologies
담당자 이경애
연락처 052-217-4163 / [email protected]
예약 가능여부 가능
예약단위 0.5hr 1일최대예약시간 6hr
예약Open(~일 전) 5일전 예약취소불가(~일 전) 2시간전
장비위치 Bldg.102, Room B115(시료 보낼 주소: 울산광역시 울주군 언양읍 유니스트길 50, 울산과학기술원 102동 201-5호)
  • Description

    - SEM sampling 장비
    - Cross section milling만 가능
    - 사용료: 25,000원/시간

    의뢰 시 참고 사항
    1. 의뢰서 접수(장비의뢰, [Request of Analysis] 누른 후 양식 입력) 후 시료와 함께 보낸다.
    2. 시료는 가로 세로 1cm x 1cm 이하로 준비(높이는 2cm 이내)
    3. 파우더의 경우 1mg 이상
    4. 시료명은 일련의 숫자로 표기하기 바람(1, 2, 3...)

    자율사용자 교육 신청은 메일 보내주세요.

    The new Hitachi IM4000 Ar ion cross section and sample surface polisher makes two milling configurations available in a single instrument.

  • Specifications

    • Type : penning type or saddle field type Ar gun

    • Discharge voltage : 0 to 1.5 kV or wider

    • Discharge current : 0 to 560μA or wider

    • Accelerating voltage : 0 to 6 kV or wider

    • Ion beam diameter : Max. 500μm or better

    • Milling rate : cross-section - 300μm/hr (sample Si, 6 kV) or better

    • Ar gas flow control : high accuracy mass flow control

  • Applications

    • High-quality sectioning (paper, polymers, powders)

    • TEM sample prep.